Before the introduction of CWDM multiplexer, it is necessary to mention the CWDM technology.
Originally, the term “coarse wavelength division multiplexing” (CWDM) was fairly generic, and meant a number of different things. In general, these things shared the fact that the choice of channel spacings and frequency stability was such that erbium-doped fiber amplifier (EDFA) could not be utilized. Prior to the relatively recent ITU standardization of the term, one common meaning for CWDM meant two (or possibly more) signals multiplexed onto a single fiber, where one signal was in the 1550 nm band, and the other in the 1310 nm band.
CWDM multiplexer is based on CWDM technology. It is a device to allow multiple optical signals at different wavelengths to pass through a single optical fiber strand. For convenience, we usually used “Mux” instead of “multiplexer” , and “Demux” instead of “deultiplexer”.
Typically, Multiplexer and Deultiplexer (Mux and Demux) are integrated in a entirety. CWDM Mux/Demux modules have 2/4/8/16/18 channels commonly, while 5/9 channels uncommonly. In FiberStore, we supply all channel CWDM Mux and Demux. Three single fiber or dual fiber connection for CWDM Mux/Demux are available. Our standard CWDM Mux/Demux package types are Plastic ABS module cassette, 19″ rack mountable box or LGX box. No matter what kind of connectors, like FC, ST, SC, LC, etc., all are available here, and we can also mix connectors on one device.
To know more about the CWDM Mux products, let me introduce one of the CWDM Mux/Demux modules to you. Here is a 18 Channels CWDM Mux and Demux by dual fiber with LGX Metal Box.
Key Features
1.Flexibility and little LGX Standard Metal Box configuration
2.Mux and Demux combined in one LGX Metal Box
3.Compliant to ITU-T G.694.2 CWDM standard
4.Accepts any data rate and any protocol on any port up to 10 Gbps, also 40 Gbps (DPSK, DQPSK) and 100 Gbps (DPQPSK)
5.Fully transparent at all data rates and protocols from T1 to 40 Gbps Completely passive, no power supply needed
6.Simple to install, requires no configuration or maintenance
8.Low-cost transceivers applicable, existing equipment can still be used ISO 9001 manufacturing facility
9.Lifetime Product Warranty
Applications
Sample pictures
Article Source : http://www.fiberstore.com/
Originally, the term “coarse wavelength division multiplexing” (CWDM) was fairly generic, and meant a number of different things. In general, these things shared the fact that the choice of channel spacings and frequency stability was such that erbium-doped fiber amplifier (EDFA) could not be utilized. Prior to the relatively recent ITU standardization of the term, one common meaning for CWDM meant two (or possibly more) signals multiplexed onto a single fiber, where one signal was in the 1550 nm band, and the other in the 1310 nm band.
CWDM multiplexer is based on CWDM technology. It is a device to allow multiple optical signals at different wavelengths to pass through a single optical fiber strand. For convenience, we usually used “Mux” instead of “multiplexer” , and “Demux” instead of “deultiplexer”.
Typically, Multiplexer and Deultiplexer (Mux and Demux) are integrated in a entirety. CWDM Mux/Demux modules have 2/4/8/16/18 channels commonly, while 5/9 channels uncommonly. In FiberStore, we supply all channel CWDM Mux and Demux. Three single fiber or dual fiber connection for CWDM Mux/Demux are available. Our standard CWDM Mux/Demux package types are Plastic ABS module cassette, 19″ rack mountable box or LGX box. No matter what kind of connectors, like FC, ST, SC, LC, etc., all are available here, and we can also mix connectors on one device.
To know more about the CWDM Mux products, let me introduce one of the CWDM Mux/Demux modules to you. Here is a 18 Channels CWDM Mux and Demux by dual fiber with LGX Metal Box.
Key Features
1.Flexibility and little LGX Standard Metal Box configuration
2.Mux and Demux combined in one LGX Metal Box
3.Compliant to ITU-T G.694.2 CWDM standard
4.Accepts any data rate and any protocol on any port up to 10 Gbps, also 40 Gbps (DPSK, DQPSK) and 100 Gbps (DPQPSK)
5.Fully transparent at all data rates and protocols from T1 to 40 Gbps Completely passive, no power supply needed
6.Simple to install, requires no configuration or maintenance
8.Low-cost transceivers applicable, existing equipment can still be used ISO 9001 manufacturing facility
9.Lifetime Product Warranty
Applications
All Enterprises and Carrier with Fiber Optic Infrastructure Transmit additional applications via existing lines Connect buildings to CWDM campus ring Connect Field offices to central office Ideal solution for metro-core, metro-access and enterprises
Sample pictures
Article Source : http://www.fiberstore.com/
No comments:
Post a Comment