2013/02/26

Fiber Patch Cable

Fiber patch cable can also be known as fiber jumper or fiber patch cord. It is a fiber optic cable terminated with fiber optic connectors on both ends. It may be directly linked to other equipment allowing you to connect and managing convenience. It's used for making patch cords from equipment to fiber optic cabling. Having a thick layer of protection, it's used to connect the optical transmitter, receiver and the terminal box.
Many applications are used with fiber patch cables, for example, Communication room, FTTH, LAN, FOS, Fiber Optic Communication System, Optical fiber connected and transmitted equipment, Defense combat readiness, etc. Fiber patch cable applies to CATV, Telecommunication network, Computer fiber network and fiber test equipment.

There are a couple of major application areas of fiber patch cable. They're computer workplace to outlet and fiber optic patch panels or optical cross connect distribution center. And there are single mode fiber patch cable and multimode fiber patch cable (multimode fiber optic patch cord). Ordinary cables are 125 um in diameter. The inner diameter for single-mode cables is 9 um and multi-mode is 50/62.5 um.

The single mode fiber patch cable is primarily employed for applications involving extensive distances. In fiber-optic communication, a single-mode optical fiber is an optical fiber designed to carry merely a single ray of mode. Modes are the possible solutions of the Helmholtz equation for waves. These modes define the way the wave travels through space, and just how the wave is distributed wide. Waves can have exactly the same mode but have different frequencies. This is the case in single-mode fibers, where we can have waves with various frequencies, but of the same mode, meaning they're distributed wide in the same way, which gives us just one ray of sunshine. Even though the ray travels parallel to the entire fiber, it is often called transverse mode since its electromagnetic vibrations occur perpendicular towards the entire fiber. It's generally yellow, having a blue connector and a long transmission distance.

Multimode fiber optic patch cord, however, is the cable of choice for most common local fiber systems as the devices because they are a lot more cheaper. Multi-mode optical fiber is a type of optical fiber mostly employed for communication over short distances, for example inside a building or on the campus. Typical multimode links have data rates more than sufficient for almost all premises applications. Due to the high capacity and reliability, multi-mode optical fiber is used for backbone applications in buildings. An increasing number of users are taking the benefits of fiber nearer to the user by running fiber towards the desktop in order to the zone. Standards-compliant architectures such as Centralized Cabling and fiber towards the telecom enclosure offer users the opportunity to leverage the distance capabilities of fiber by centralizing electronics in telecommunications rooms, rather than having active electronics on each floor. Multimode fiber is generally, orange or grey, with a cream of black connector along with a short transmission distance.

FiberStore offers many different types of optical fiber patch cables, for example mode conditioning patch cable, armored patch cable, MPO/MTP cable along with other special patch cables. For instance, SC OM3 Mode Conditioning Patch Cable is really a kind of mode conditioning patch cables with the wavelength OM3 and a SC connecter. All mode conditioning fiber optic patch cords are created with duplex cable with a single mode to multimode offset fiber connection part within the two legs.

No comments:

Post a Comment